All Roofing Solutions

Tag: flashing

Residential Roofing: 4 Easy Steps to Chimney Leak Repair
When it comes to safeguarding your home from the elements, one challenge that demands particular attention and careful planning is chimney leak repair.

Chimney leaks are among the most common roof leaks homeowners experience and can be challenging to deal with, especially if you’ve never dealt with them before. Typically, however, if there is a leak around your chimney you’ll most likely need flashing repair/replacement.

It may be that the flashing around the chimney is inadequate, worn, or corroded, or that it was improperly installed in the first place. Do not use caulk to repair these flashings! Whenever it’s practical to replace damaged roof flashing, have your roofing contractor do so.

4 Steps to Chimney Leak Repair
1. Thorough Inspection: A comprehensive chimney leak repair job kicks off with a thorough inspection. Rushing into flashing replacement isn’t the solution. Your chimney’s base and walls undergo scrutiny to assess the extent of the damage. This evaluation guides your roofer in determining the precise repair approach. Expect potential replacement needs not only for flashings but also for siding and decking, all pinpointed during this thorough assessment.
2. Clearing the Way: Often, the initial task involves removing worn-out materials from the chimney’s base. Old flashings and seals make way for precisely installed new counterparts. Bid adieu to former roof cement and waterproof caulking that sealed the flashing-shingle-chimney nexus. This phase extends to the removal of all flashings, siding, and possibly even plywood that no longer meets the grade.
3. Flawless Flashing Renewal: Step and counter flashing inevitably warrant replacement. Any compromise—cracks, chips, tears, or bending—is unacceptable. The spotlight is on perfection. Restoring these elements is pivotal for a watertight and durable repair.
4. Airtight Seal: New flashing takes its place, followed by employing masonry caulk to shroud flashing-chimney junctures. To guarantee impeccable results, flashing seams are sealed meticulously using waterproof roofing cement or specialized flashing cement/caulking. Your chimney’s readiness to defy leaks is sealed alongside these materials, ensuring long-lasting protection.
Stop Chimney Leaks Today – Hire a Roofing Contractor

Since improperly installed flashing leaves your home unprotected from rain, wind & hail and will allow water penetration to occur again and again, it is critical to handle repairs immediately.

If you need an experienced Delaware or Eastern Pennsylvania roofing repair contractor, call All Roofing Solutions. Specializing in residential and commercial roofing repair and replacement, we are a skilled local roofing company with over 15 years of experience and a reputation for honest and thorough service. We’ll be happy to assist you with your emergency roofing repaisr, large and small.

To schedule your free consultation, call 302-725-ROOF (7663) in Delaware or 610-551-ROOF (7663) in Pennsylvania. Contact us today and receive a discount of 15% off any roofing repair job.

Why Choose All Roofing Solutions
- Family-owned and operated contractor
- Fully licensed and insured for your protection
- Over 25 years of experience with roofing & siding installation and repair
- A+ rated BBB member
- Complimentary Extended Material warranty
- 30-year workmanship guarantee on full roof replacements
- Lien Waiver to protect the homeowners from material liens
- Own crew—no subcontractors!
- Full-service roofer handling all types of residential and commercial roofing, windows & siding projects.
- Most re-roofing projects are completed in one day.
- Because we are efficient we are able to offer very competitive prices compared to large contractors with bigger overhead.
- Each roofing/siding project includes a meticulously performed, post-roofing inspection. We want to make sure that your roof replacement is done correctly and that it meets your complete satisfaction.
- The company owner supervises all projects to ensure high-quality workmanship.
- Customer Satisfaction Guaranteed!
June 2, 2023
Leaky Chimney Flashing Inspection & Repair Tips From a Roofing Contractor
Roof damage doesn’t just mean you’re dealing with old, worn-out shingles. Damage to the chimney structure is quite common as well, with many culprits behind it. Fortunately, proper maintenance and correct repairs can mitigate most of these issues, including chimney flashing issues.

Common Reasons Behind Leaky Chimney

Over time, chimneys tend to develop cracks and crevices that allow water to permeate them. Additionally, the sections of metal applied at the seams between the chimney and roof—called roof flashing—may come loose or break due to high winds and other inclement weather.

Improper chimney flashing installation can also open up your roof to early deterioration. Chimney leaks are the primary form of damage you will notice from a faulty chimney flashing installation. Instead of keeping rain and snow out of the roof seams, sub-par flashing allows moisture into the roof’s inner structure. Water seepage can cause mildew, mold, and premature aging of the roof.

If you have a chimney, regular maintenance, yearly inspections, and prompt repairs are a must. You have to be proactive if you want to avoid nasty chimney leaks or, worse, damage to your roof caused by chimney problems you ignored for too long.

Roof Maintenance: Chimney Flashing Inspection & Repair

If you’re dealing with chimney damage or leaks don’t despair—problems caused by damaged chimney flashing can be mitigated through regular roof inspections & effective repairs.

Chimney Inspection

Leaky chimney problems can quickly become costly and may include drywall warping, ceiling stains, insulation saturation, mold growth, and interior home damage. That’s why we recommend annual inspections handled by a professional.

When you hire a roofing inspection contractor to check the integrity of your roof, they will inspect not only the roof, but also the chimney, vents, skylights, all areas of flashing, and your home’s drainage systems. If there are any problems with the chimney, such as broken bricks, loose mortar joints, cracks around the chimney foundation, or deteriorating flashing, prompt repairs should be your next priority.

Chimney Flashing Repairs vs Replacement

Chimney flashing needs to be replaced when it becomes rusty, corroded, chipped, or broken. Masonry caulk can seal small gaps or holes on a short-term basis but is not designed to take the place of the flashing. Depending on the state of the flashing, part of the chimney and surrounding roof shingles may also need replacement.

Oftentimes flashing can be repaired—you can follow our simple steps to chimney flashing repairs we’ve covered on this blog. However, if flashing shows signs of rust or other weather wear, your contractor may need to remove shingles to install new flashing. This is not a do-it-yourself undertaking, since improper flashing installation could void your roof warranty.

We Repair Leaky Chimneys!

Don’t wait for small problems to develop into damaging leaks – take proactive steps today to ensure the long-lasting integrity of your roof and the protection of your home.

Schedule a roofing inspection to diagnose specific problems or evaluate the overall condition of your roof with All Roofing Solutions. We’re a family-owned and operated contractor with over 20 years of experience in residential and commercial roofing. We offer affordable, expert roof repair, replacement, and installation services to customers throughout Delaware and southeastern Pennsylvania.

To schedule your free consultation, call 302-725-ROOF (7663) in Delaware or 610-551-ROOF (7663) in Pennsylvania. Don’t forget to ask about our discount of 15% off any roofing repair job!

Why Choose All Roofing Solutions
- Family-owned and operated contractor
- Fully licensed and insured for your protection
- Over 25 years of experience with roofing & siding installation and repair
- A+ rated BBB member
- Complimentary Extended Material warranty
- 30-year workmanship guarantee on full roof replacements
- Lien Waiver to protect the homeowners from material liens
- Own crew—no subcontractors!
- Full-service roofer handling all types of residential and commercial roofing, windows & siding projects.
- Most re-roofing projects are completed in one day.
- Because we are efficient we are able to offer very competitive prices compared to large contractors with bigger overhead.
- Each roofing/siding project includes a meticulously performed, post-roofing inspection. We want to make sure that your roof replacement is done correctly and that it meets your complete satisfaction.
- The company owner supervises all projects to ensure high-quality workmanship.
- Customer Satisfaction Guaranteed!
March 28, 2023
Top 3 Roof Leak Repairs Residential Contractors Get Calls About
As a homeowner, you’d like your roof to maintain its integrity over the years but common wear and tear and following roof leaks are inevitable. Roof leak repairs are simply part of the roof’s life.

While there are many reasons for a roof’s deterioration, some roof areas are more prone to leaking than others. Skylights, chimneys, and vent pipes all provide an opportunity for moisture to get through, especially in older roofs or when they have not been installed properly.

Residential Roofing: 3 Most Common Roof Leak Repairs

1. Roof Leak Repairs: Leaky Skylight

A leaky skylight can be a homeowner’s worst nightmare. More often than not, an improper installation is the cause of a leak. If that’s the case, your local roofing contractor must handle the repairs to avoid further damage.

Some common situations that cause skylights to leak are improperly installed fasteners, poor flashing seals, glass micro-fractures or fissures, and sealant failure due to thermal expansion. If the skylight leak is at the roof flashing, it may be possible to make temporary repairs using roof flashing cement around the perimeter of the unit. However, proper repairs will require removing shingles near the skylight, installing appropriate flashing, and reinstalling new shingles in the area. Most skylights have integral flashing or a special flashing kit that is specifically designed for the skylight and roofing material.

A thorough roofing inspection will help your roofer uncover any problems with your skylights and suggest appropriate repairs so that should be your first step.

2. Roof Leak Repairs: Chimney Flashing

Damage to the chimney structure is quite common as well, as chimneys can develop cracks and crevices that allow water to permeate them. Instead of keeping rain and snow out of the roof seams, sub-par flashing allows moisture into the roof’s inner structure. Water seepage can cause mildew, mold, and premature aging of the roof.

To fix this problem, start with a thorough inspection of your chimney base and walls looking for gaps, cracks, and obvious wear and tear. Chimney flashing needs to be replaced when it becomes rusty, corroded, chipped, or broken. Masonry caulk can seal small gaps or holes on a short-term basis but is not designed to take the place of the flashing. Depending on what you find, roofing cement, caulking, and more often than not flashing will need to be replaced.

Since improperly installed flashing leaves your home unprotected from rain and snow it is always best to have a professional roofer address more extensive flashing problems.

3. Roof Leak Repairs: Vent Pipe Repairs

Aside from skylights and chimneys, roof vents are one of the most common causes of roof leaks. Rusty and cracked vent pipe collars around their base allow the water to first pool around, then seep through the interior walls of your home. Again deteriorated flashing & old roof cements & sealants might be the reason behind vent pipe leaks.

Occasionally, vent pipe leaks can also occur at the collar surrounding the base of the vent pipe where it breaks through the surface of the roofing material. When this occurs, rainwater can seep in between the rubber boot and the vent pipe and accumulate in your home, causing damage. If the rubber boot collar is cracked or damaged, it will need to be replaced.

Need a Pro to Handle Your Roof Leak Repairs?

If your roof is leaking contact a professional roofer for an inspection and repairs.

Contact All Roofing Solutions, your Delaware roofing repair contractor with over 15 years of experience examining and repairing all types of roof problems. We’re here to help with all your roofing needs and are available to assist you with roof leak repairs, new installations, and roofing inspections.

To schedule your free consultation, call 302-725-ROOF (7663) in Delaware or 610-551-ROOF (7663) in Pennsylvania. Contact us today and receive a discount of 15% off any roofing repair job.

Why Choose All Roofing Solutions
- Family-owned and operated contractor
- Fully licensed and insured for your protection
- Over 25 years of experience with roofing & siding installation and repair
- A+ rated BBB member
- Complimentary Extended Material warranty
- 30-year workmanship guarantee on full roof replacements
- Lien Waiver to protect the homeowners from material liens
- Own crew—no subcontractors!
- Full-service roofer handling all types of residential and commercial roofing, windows & siding projects.
- Most re-roofing projects are completed in one day.
- Because we are efficient we are able to offer very competitive prices compared to large contractors with bigger overhead.
- Each roofing/siding project includes a meticulously performed, post-roofing inspection. We want to make sure that your roof replacement is done correctly and that it meets your complete satisfaction.
- The company owner supervises all projects to ensure high-quality workmanship.
- Customer Satisfaction Guaranteed!
March 8, 2023
Residential Roofing: 5 Shingle Repair Mistakes to Avoid
Roofing repairs are seldom straight forward – many things could go wrong, and often homeowners end up dealing with unforeseen and costly complications, especially in DYI situations or when dealing with unskilled roofers.

For one, the source of a roof leak is often not easy to determine. Usually a leak is the first indication of trouble, but the location of the leak does not always point to the source of the problem directly – and so the damage continues to develop unbeknownst to the homeowner. Damaged or improperly installed shingles continue to allow water to seep underneath and sometimes accumulate several feet from the source. This pooled water can cause further degrading of the roof and sub-roof materials.

Roofing repairs that are done without a thorough inspection designed to uncover problems like these are seldom successful. This is where the expertise of a skilled roofing contractor comes in.

All Roofing Solutions has been helping Delaware homeowners install and repair their roofs for 20 years! Call (302) 725-7663 or (610) 551-7663 if you need a professional help!

Residential Roofing: 5 Shingle Repair Mistakes to Avoid

Whether you’re the DIY type, or hiring a roofer to handle your repairs, you should be aware of some of the common mistakes that often happen in roof repair:
1. Inadequate or faulty base: It’s never a good idea to simply place new shingles on top of damaged ones during repairs – something lower quality roofing companies do to cut corners. A surface repair does not address problems that arise from damaged decking or improperly installed underlayment. Your roofer must inspects all decking to make sure that it is in proper shape, and has been installed correctly – without evaluating the structural integrity of the sheathing, your chances of overlooking the damage underneath is high. For best results, all damaged shingles should be removed so that an examination of the deck and sheathing can be conducted–and properly addressed.
2. Incorrectly installed shingles: Proper alignment of shingles, especially the starter course, is critical for a successful repair job. Care should be taken to offset joints and to be sure shingles lay flat. Ignoring these considerations may lead to the development of leaks that are hard to detect until serious damage is done.
3. Improper or not enough fastening: A good repair job depends on decking, underlayment and shingles that are all properly attached. Inadequate fastening (such as using nails that are too short) allows wind to raise shingles, moisture to work its way through the layers, and leaks to develop. Make sure your roofer uses long enough nails to reach the decking in order to avoid dealing with shifting and displaced shingles down the road.
4. Poorly installed flashing or reusing old flashing: Flashing is needed to channel moisture away from critical areas. Adequate flashing in valleys and around chimneys, skylights, vents, and satellite dish installations keep these vulnerable areas from allowing water to penetrate the roof. Proper flashing installation is key to avoiding leaks around those roof connections – make sure your flashing is not misaligned, improperly overlapped or insufficiently fastened. It is also important to avoid reusing old flashing as that can be problematic down the road. Again, this is something poor quality roofers tend to do to save money – make sure your roofer only installs new flashing.
5. Ignoring manufacturers’ specifications: Failure to follow guidelines may void manufacturers’ warranties. Proper preparation and installation ensures a quality repair job and maintains the warranty. It’s best to hire certified roofers with proven experience
We Have Extensive Roofing Repair Experience

Avoid costly roof repair mistakes by working with an experience contractor like All Roofing Solutions. We’re licences and insured, and with 20 years of experience in roof repair and replacement we have the knowledge and expertise to make sure the job is done right, with quality products and following industry-leading standards.

To request a free estimate, call 302-725-ROOF (7663) in Delaware or 610-551-ROOF (7663) in Pennsylvania. And don’t forget to ask about our discount of 15% off any roofing repair job!
July 26, 2018
3 Roofing Maintenance Tips That Will Save You Money
If you’re like most homeowners, you don’t spend too much time thinking about the condition of your roof unless something goes wrong. If it needed a major repair or, even worse, a replacement, you’d probably think about it then!

As we all know, unfortunately, replacing a roof can be a big financial hit – you can expect to pay between $1.50 and $4 per square foot for an asphalt shingle roof. On the other hand, preventative maintenance will cost only your time. So, today we’ll show you simple ways you can put off that replacement for years to come – all with some know-how and little effort!

3 Roofing Maintenance Tips That Will Save You Money

Below are several maintenance steps you can take to extend the life of your roof and save you a lot of money in the long run.

#1. Install proper ventilation and adequate insulation.

This is among the most critical–and often overlooked–steps in extending the life of your roof. Without proper ventilation, a buildup of heat and moisture in your attic can lead to roof rot and diminished insulation efficiency. In winter months, a poorly ventilated attic is a key contributor to the formation of damaging ice dams. In short, properly insulated and ventilated attic space allows your roof to perform well for a longer period of time.
- Attics should be insulated to R-38, which is about eighteen inches of insulation material.
- Most building codes require 1 square foot of venting for each 150 square feet of attic space.
- If there are portions of insulation that have been eroded down, remove it all then install full eighteen inches of new insulation material in its place (instead of simply adding more on top).
- Homeowners should avoid attic fan ventilators with blocked soffit vents, according to Energy Star. Turbine or fan ventilation systems are unreliable, as their moving parts are sure to break down over time. Soffit and ridge venting systems are a much better solution.
- Be aware of all soffit vents around the perimeter of the house and take steps to ensure these vents remain unblocked by debris, insulation, or outside materials.
- Install a thermometer in the attic that can remotely tell you the area’s temperature so you can monitor the situation on an ongoing basis.
#2. Keep gutters and downspouts clear.

Leaves, twigs and other debris can clog your gutter system, causing expensive water leaks in your attic and interior living spaces. If they are clogged, gutters and downspouts can’t channel water and snowmelt away from your home. While you’re cleaning out the gunk, inspect your gutters for signs of damage:
- Evaluate the gutter angle, making sloping adjustments as necessary. Properly installed rain gutters are slightly sloped toward the downspout, allowing water to drain efficiently. Improperly sloped gutters will result in pooling, which over time will rot or corrode your gutters.
- Inspect for gutters pulled away from the home. If water pools in your gutters for any reason, the weight of the water may, over time, loosen the fasteners and allow the gutter to pull away from your structure.
- Check for leaks and holes using a garden hose.
- Inspect your downspouts for any leaks or signs of excessive wear.
- Install gutter guards – we recommend and install Leaf Relief^®.
#3. Inspect your roofing.

It’s a good idea to perform a routine inspection on a regular basis. Look for signs of damage on the roof surfaces, as well as in the attic and interior of your home. Small leaks or minor damage can often be repaired for little cost. Ignoring them, and allowing them to become major problems, can be a very expensive mistake.
- Check flashings for holes, corrosion, cracks, or other signs of damage or deterioration. These metal strips installed where the main body of the roof meets up with the home’s siding, chimneys or skylights create connections that are especially prone to roof leaks.
- Check for broken, cracked, curled, or missing shingles, and any signs of a loss of granulation. Loose or damaged shingles is a common problem. Over time, high winds, hail, tree branches and other debris can take a toll. Often, a little roofing cement may be all that’s needed to repair a loose shingle tab. If the shingle is damaged, you’ll want to have it replaced.
- Check for blisters, cracks, and tears around the edges of the roof
- Inspect damaged chimney bricks and buckled or torn flashing, cracked or worn caps and joints. Check caulking/sealants around the roof for cracking or other damage. Old, worn sealants should be replaced before water seepage causes problems.
- Assess the condition of exhaust pipes, valleys, outer edges or angles where the roof meets the walls.
Need A Roofing Contractor?

A family owned & operated DE/PA roofing contractor, All Roofing Solutions has been serving Delaware and Pennsylvania for nearly 20 years! Whether you need help with inspection, maintenance or repairs, we’re ready to assist you!

To schedule your free consultation, call 302-725-ROOF (7663) in Delaware or 610-551-ROOF (7663) in Pennsylvania. Contact us today and receive a discount of 15% off any roofing repair job.
July 12, 2018