Roofing Inspection Contractor

First, your inspector will examine the interior of the house, including ceilings, walls, and attic areas for internal evidence of wind, water, or hail damage. Leaks inside your house are an obvious sign of damage and need attention immediately, especially those around skylights and chimneys.

Next, the contractor will walk the perimeter of your home, noting the location and state of chimneys, gutters, vents, and flashing points. At the same time, the home’s siding and eaves are checked for external water stains, hail dings, and indications of dry rot.

Next, the roofer will ascend the roof to examine its construction, flashing, vents, and chimney. He will check for common roofing problems such as missing, broken, cracked, or cupped shingles, and broken shakes or tiles. He will look closely for granules in the gutter and downspout—an indication that shingles may be approaching the end of their life (shingles stripped of coating granules are vulnerable to UV radiation, and will crack then break off, allowing water to penetrate the surface).

He will check for cupped shingles, an indication that the attic is not vented properly, and evaluate your attic ventilation, insulation, and moisture levels as needed. He will check for cracked, damaged, or missing flashings, damaged chimney bricks, open seams or wear from extreme sun exposure, and note any algae growth on the shingles (unsightly though not usually damaging black stains).

Lastly, the condition of your gutters will be examined. The inspector will look for problems such as improper installation, debris buildup, or warped material. He will check for missing sealant, holes, and leaks, paying special attention to hangers, aprons, pitch, and any signs of sagging.